Ceramic laser plunger tips,plunger Piston
Name |
Laser Plunger piston,
ceramic laser plunger tip |
Hardness: |
45-50HRC, 48-60HRC |
Size: |
50*90, 60*90, 70*90, 80*90cm or OEM |
Screw head: |
M30×2, M36×4, M42×2 or OEM |
Material |
Good ductile cast iron + ceramic powder lasered |
Ceramic laser plunger tips, is special products based on steel surface,
on the surface, it Welding ceramic powder by laser.
Uneven surface wrinkle, make the lubricating more effect and prolong its service life times.
Life time:
Diameter below 80mm, 30000+ times
Diameter big than 90mm, 20000+ times
Usage:
1. 1.Make sure the plunger tips, the pressure chamber, sleeve have a good concentricity,
Good tolerances, avoid tips surface get strain, scratched or one side tear and wear.
2. Ensure the lubricant have good cooling and lubrication features, if it is too hot, it will
Make the plunger tips crack or tear and wear.
3.Melting cup and sprue bushing must matched perfect, or it will make the tips tear and wear.
4. After the plunger tips install done, it need heating about 5-10 times.
We professional provide products for die casting including:
Shot beads / Plunger lubricant, Shot beads dispenser,
Plunger tips, shot sleeve,Spray Gun,Ladle cup,
Core Vent, heating elements and so on.
FAQ:
1. Delivery time: Very fast 5-15 days.
2. Package: Solid package with carton / bag/ drum and pallet
3. Quality: Quality is very good.
4. Delivery port: Mostly from Shanghai port, if you need other port like
shenzhen, qingdao, guangzhou and so on, it is also ok.
Our price is very good, hope to be your best partner for die casting,
Any more details of products, package, payment, delivery etc,
welcome contact with us, we will reply to you soon.