Mold Release agent for die-casting
Lubricant for mould release
Description
High concentration emulsion of precious active ingredients.
Die-casting lubricant for aluminum and alloy-metal.
Casting release agent ensures a very high thermal resistance and very good filming properties.
It gives the melted alloy a very high sliding power and a good surface appearance to the casts.
Casting release agent is particularly suitable for high weight pieces, like the automotive sector.
It is suitable for the production of
casts with variable thickness, even without build-up on low temperature Dies.
Casting release Agent water based is a low smokiness, low environmental impact product. It doesn’t contain harmful substances.
TECHNICAL DETAILS
Physical form:white liquid
PH (pure): 8.5
Density (20°C):about 0.985 g/ml
Flammability: not flammable
Miscibility: miscible in water
Mix ratio: 1:400, 1:100
HOW TO USE:
1. Dilute with automatic mixer, or pour the product into water: the
blending is immediate and it is not necessary to shake the product
during the use. Avoid to dip contaminated pipes into the
concentrated product. Do not blow air into the bulk.
2 The suggested dilution percentage range is: 1.0-1.5
The best usage dilution depends on the specific mould, on its range
of temperature and on many other parameters. The right dilution
ratio must be determined by means of empirical tests.
3. Apply the diluted product with manual or automatic spraying system
at a pressure of 4 - 6 bar at distance
PACKAGING: 25Kg /drum
STORAGE:
Avoid storage with exposure to direct sunlight. Do not store near heating sources.
Store at temperature below +35C.
To Store at temperature above +5°C.
Any more details of products, package, payment, delivery etc,
welcome contact with us, we will reply to you soon.
E-mail :Sales@sarimetaltreat.com
TEL: +86 21 31145131
Whats App: +86 136 5184 7558